Launch Kit
01
Unbox solaqua 28
1. Carefully remove your device with the foam still attached
2. Remove the plastic cover and remove foam bumpers
02
Release downspout
Fully extended? Get your device into warming position!
Swing the intake tube to the open locked position, you will feel a small click when engaged.
03
Attach export tube
Firmly press the export tube provided into the quick connect fitting.
When you can no longer push, the tube is engaged and in place.
To remove, compress the blue ring downward and pull the export tube free.
04
Connect Device
The Solaqua 28 comes preset with a temp of 95. By using an android smartphone only at this time (iPhone coming soon), you can set your temperature to the desired degree.
05
Get Connected
Make sure your bluetooth is on to pair your device.
This may take a few moments, once connected, your device name will appear.
06
Set Temperature
6a. Scroll to desired temp
6b. Press "send" to set your device
For best results, set between 90 - 100 degrees
07
Locate the best spot
The best spot will always be in direct sunlight. This will produce the warmest experience!
Simply place your solaqua in the water
08
Place in direct sunlight
Almost time to feel the magic. Use our anchor to keep it in the right place.
09
Using your device
The solaqua is quiet, once the device is on, it is preparing to warm your pool. Let it float in peace!
10
Storing your device
Store the device upside down on a protected surface, this will allow for proper draining during the colder months.
